02-14-2020, 10:42 PM
Product Introduction
High Voltage EV charging module is specially developed for EV DC chargers. It has high efficiency,high power factor, high power density, high reliability advantage. AC input is 3 phase 4 wire, DC output voltage range from 150 to 550VDC, 15KW output power, compliant with CE safety requirements, EMC standard EN 61000-6-3 and EN61000-6-1 Classss A, it is an advanced international level charger module.
Unique Function
1) High efficiency over the full load range, full load efficiency greater than 95.5%
2) Wide output voltage range, 150-550VDC,suitable for a wide range of EVs
3) Constant current for higher output power at low output voltage
4) An international patented intelligent discharge circuit automatically discharges residual charge, simplifying system designs
5) Low standby power consumption, less than 10W
Main Features
1) 3 phase without neutral eliminates the risk of high neutral currents
2) 3 phase active power factor correction technology, reduces the harmonic interference to the grid
3) Dual DSP design, achieve the full digital control, less components means high reliability
4) Wide input voltage range, 260-530VAC, allows operation in most poor grid conditions
5) Wide operating temperature range,-40鈩?+75鈩?/p>
6) Hot pluggable
7) CAN interface
Product Application
Charging stations for low speed EV, Passenger electric car, Electric bus
Product Specification
Technical Specification
GSCH500030A
GSCH7500020A
Environmental
Ambient Temperature-20鈩儈+75鈩?derating from 55鈩?/p>
Storage Temperature-40鈩儈+75鈩?/p>
Humidity鈮?5%RH, without condensation
CoolingFan cooling
AltitudeUp to 2000m
AC InputInput voltage range260~530VAC, 3 phase without neutral
MAX input current<30A
Frequency range45Hz~65Hz
Power factor鈮?.99
Efficiency(full load)>95.5%
ITHD(total harmonic distortion<5%
DC OutputOutput power15KW@output voltage>430VDC15KW@output voltage>600VDC
Output voltage range150~550VDC150~750VDC
MAX Output current35A25A
Output current limit set point0~35A0~25A
Current sharingAverage current 卤0.5A
Voltage accuracy<卤0.5%
Current accuracy鈮ぢ?%(output power in 20%~100%)
ControlCommunicationCAN BUS
Indication LightGreen LED:normal operation,Yellow LED:alarm Red LED:failure
Alarm and Protection FunctionInput over/under voltage protectionAutomatic shutdown,automatic restart when voltage return to normal
Output overvoltage protectionAutomatic shutdown and lock,need input restart to unlock
Overcurrent and short circuit protectionAutomatic shutdown and lock,need input restart to unlock
Over temperature protectionAutomatic shutdown,automatic restart when the temperature return to normal
Reliability and SafetyMTBF>500,000h
SafetyCE Compliant
MechanicalDimension84mm(H)x226mm(W)x395mm(D)
Weight鈮?0kg
Product Qualification
Delivery, Shipping and Serving
FAQ
Q: Can you provide a sample?
A: Yes, we can. Please contact us freely.
Q: I need your price list of all your products. Do you have a price list?
A: Yes, we made a lot of customized products and provide OEM, ODM services.
Q: What about your delivery time?
A: We deliver 150000 sets annually and 1000 sets per month, so the production takes 2-3 working days.China DC Charger Module
website:http://www.grasen-power.com/power-modules/dc-charger-module/
High Voltage EV charging module is specially developed for EV DC chargers. It has high efficiency,high power factor, high power density, high reliability advantage. AC input is 3 phase 4 wire, DC output voltage range from 150 to 550VDC, 15KW output power, compliant with CE safety requirements, EMC standard EN 61000-6-3 and EN61000-6-1 Classss A, it is an advanced international level charger module.
Unique Function
1) High efficiency over the full load range, full load efficiency greater than 95.5%
2) Wide output voltage range, 150-550VDC,suitable for a wide range of EVs
3) Constant current for higher output power at low output voltage
4) An international patented intelligent discharge circuit automatically discharges residual charge, simplifying system designs
5) Low standby power consumption, less than 10W
Main Features
1) 3 phase without neutral eliminates the risk of high neutral currents
2) 3 phase active power factor correction technology, reduces the harmonic interference to the grid
3) Dual DSP design, achieve the full digital control, less components means high reliability
4) Wide input voltage range, 260-530VAC, allows operation in most poor grid conditions
5) Wide operating temperature range,-40鈩?+75鈩?/p>
6) Hot pluggable
7) CAN interface
Product Application
Charging stations for low speed EV, Passenger electric car, Electric bus
Product Specification
Technical Specification
GSCH500030A
GSCH7500020A
Environmental
Ambient Temperature-20鈩儈+75鈩?derating from 55鈩?/p>
Storage Temperature-40鈩儈+75鈩?/p>
Humidity鈮?5%RH, without condensation
CoolingFan cooling
AltitudeUp to 2000m
AC InputInput voltage range260~530VAC, 3 phase without neutral
MAX input current<30A
Frequency range45Hz~65Hz
Power factor鈮?.99
Efficiency(full load)>95.5%
ITHD(total harmonic distortion<5%
DC OutputOutput power15KW@output voltage>430VDC15KW@output voltage>600VDC
Output voltage range150~550VDC150~750VDC
MAX Output current35A25A
Output current limit set point0~35A0~25A
Current sharingAverage current 卤0.5A
Voltage accuracy<卤0.5%
Current accuracy鈮ぢ?%(output power in 20%~100%)
ControlCommunicationCAN BUS
Indication LightGreen LED:normal operation,Yellow LED:alarm Red LED:failure
Alarm and Protection FunctionInput over/under voltage protectionAutomatic shutdown,automatic restart when voltage return to normal
Output overvoltage protectionAutomatic shutdown and lock,need input restart to unlock
Overcurrent and short circuit protectionAutomatic shutdown and lock,need input restart to unlock
Over temperature protectionAutomatic shutdown,automatic restart when the temperature return to normal
Reliability and SafetyMTBF>500,000h
SafetyCE Compliant
MechanicalDimension84mm(H)x226mm(W)x395mm(D)
Weight鈮?0kg
Product Qualification
Delivery, Shipping and Serving
FAQ
Q: Can you provide a sample?
A: Yes, we can. Please contact us freely.
Q: I need your price list of all your products. Do you have a price list?
A: Yes, we made a lot of customized products and provide OEM, ODM services.
Q: What about your delivery time?
A: We deliver 150000 sets annually and 1000 sets per month, so the production takes 2-3 working days.China DC Charger Module
website:http://www.grasen-power.com/power-modules/dc-charger-module/
