Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Use of constant temperature and humidity test chamber
Use of constant temperature and humidity test chamber

You must know the usage of the constant temperature and humidity test chamber, but you may not know much about the use and maintenance of this equipment. The high and low temperature environmental test chamber can be used to assess and determine that electrical and electronic products or materials are stored under high temperature or low temperature environmental conditions when the temperature changes cyclically on the surface of the product. The most common temperature test equipment in the high and low temperature test chamber environmental test equipment, and its similar related products include high and low temperature alternating test chamber, constant temperature and humidity test chamber, high and low temperature humidity and heat alternating test chamber and so on. It is suitable for high temperature and low temperature reliability test of industrial products.

The xenon lamp aging test box uses xenon lamps that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, and can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control.

1. Regarding the slow heating of the equipment, it may be due to system failures, such as whether the heating pipe is broken, check whether the heating pipe cable is loose, check whether the equipment control instrument is burned, whether the circuit is short-circuited, etc.

2. When the humidity in the constant temperature and humidity test box cannot be displayed, first check whether the humidifier is normal, and then check whether the electric control part is normal. If the alarm persists, you need to check for water shortages.

3. With only high temperature and no low temperature, the compressor may work normally because the compressor lacks refrigerant, or poor heat dissipation due to blockage of the radiator, or due to blockage or leakage of pipes, please check for any related reasons.

4. Uneven temperature and humidity in the cabinet may also be a problem with the stirring fan. First, you need to check the working condition of the fan. Such as noise, whether the motor is burned out, the bearing is out of oil, etc. , You need to notify the merchant in time for repairs. 
Horizontal Vertical Combustion Tester
Glow wire tester
Needle Flame Tester

Forum Jump:

Users browsing this thread: 1 Guest(s)